https://frequencyspecific.com/faq Dr. McMakin explains FSM
No technique is 100% effective and FSM is no exception. The effectiveness of FSM depends almost entirely on an accurate diagnosis. Shoulder pain can come from muscles, tendons, bursa, discs, nerves or joints. FSM will treat all of these pain generators effectively. But, if you are treating for muscle and the shoulder pain is from nerves or the bursa you may change the muscle but you won’t change the patient’s pain since it is not coming from the muscle. This analogy applies to every condition.
Dr. McMakin has been using FSM since 1994 and various practitioners have been using it since 1997. There have been no permanent adverse effects attributable to the use of the microcurrent units or to the use of the frequencies. There are two effects to be considered- the effect of the current and the effect of the frequencies. The practitioner is protected from the current by wearing latex gloves and is therefore not affected by the current. The practitioner is in the field created by the frequencies and the resonance effect experienced by the patient. This field can be perceived by some practitioners and is either pleasant or bothersome depending on the practitioner’s ability to process the sensations.
The sensation is usually perceived as being “light or floaty” and lasts only as long as the practitioner is using a frequency that is producing a positive effect on the patient. In every class, there is a bell-shaped curve of sensitivity to this sensation. 10% of the class will not feel anything at all in response to the frequencies. 10% of the class will feel a strong sensation of being “floaty or light headed (not dizzy) or slightly “stoned”. The rest of the class will have perceptions someplace in between those two groups. Patients fall into roughly the same bell-shaped curve of sensitivity. The “floaty feeling” response occurs not as a result of any particular frequency but in response to any frequency that resonates with the patient’s condition.
There are no risks to the patient that we know about as long as the practitioner follows the proper contraindications and precautions associated with both FSM and the use of microcurrent. There are frequencies used to remove scar tissue that should not be used with 6 weeks of the time of a new injury. Sometimes when muscles are successfully treated the range of motion increases so much that joints and nerves can become temporarily painful until the range of motion goes back down. Practitioners are aware of these possible reactions and are advised to warn patients about them. After muscles are treated there is sometimes a detoxification reaction that occurs 90 minutes after treatment similar to that seen with massage therapy. This can be lessened by having the patient drink water and take an anti-oxidant combination supplement. The warnings and contraindications appropriate to TENS devices are taught as part of the practicum sessions and reinforced during the lecture.
Category: FSM Courses
The frequencies appear to change a variety of conditions and tissues and change pain and function in a large number of clinical conditions. FSM is especially effective at treating nerve and muscle pain, inflammation and scar tissue. There is a kind of fibromyalgia associated with spine trauma that is particularly painful and difficult to treat even with narcotics. There is one frequency combination, and only one frequency combination, that has been observed to eliminate pain in patients with this condition. Shingles responds very well to only one frequency combination that eliminates the pain in 20 minutes and causes the lesions to dry up and disappear in approximately two to three days. There is one frequency combination that so far has been 100% effective in eliminating kidney stone pain. This frequency combination does nothing to remove the stone; it only eliminates the pain. The frequencies have created observed effects in asthma, liver dysfunction (reducing elevated liver enzymes), irritable bowel and many other conditions. It has been observed that patients who are treated within four hours of a new injury including auto accidents and surgeries have much reduced pain and a greatly accelerated healing process.
Frequency Specific Seminars makes no claims about the use of frequencies in the diagnosis and treatment of any condition. The frequencies appear to have beneficial affects when used in a clinical setting as an adjunct to appropriate medical diagnosis and treatment. More research is needed to document specific effects.
There are no guarantees that any protocol is going to be effective in any given patient on any given condition. In general, the frequencies either work or don’t work and if they don’t work they simply have no effect. In the seminars, physicians are advised to use good judgment and use FSM as an adjunct to appropriate medical diagnosis and treatment. As long as appropriate proven therapies are not delayed or withheld, FSM can be very helpful. Every practitioner is trained in the concept that FSM is to be used as an adjunct to therapeutics appropriate to their discipline for the patient after proper diagnosis. The FSM motto is “Can’t hurt; might help.”
It is NOT recommended that the frequencies be used to treat cancer. The condition is too serious and too complicated to be addressed with this technique. Dr. Arlene Lennox of Fermi Labs in Chicago published a paper showing that patients treated for scar tissue following neutron therapy for cancer that still had active tumor during the microcurrent treatment with Acuscope device had no increase in tumor growth and actually tolerated radiation therapy with fewer side effects.
Category: FSM FAQs
What is Frequency Specific Microcurrent
A frequency is the rate at which a sound wave or electronic pulse is produced. This measurement is registered in hertz (Hz). In using FSM to treat pain, it’s been found that various frequencies can be used to potentially reduce inflammation (swelling), repair tissue, and reduce pain.
How does frequency-specific microcurrent work?
FSM is applied to the body with a device that delivers a mild current. Microcurrent is an extremely mild electrical current (one millionth of an ampere). The human body actually produces its own current within each cell.
In FSM, depending on the tissue involved, specific frequencies are selected to encourage natural healing of the body and to reduce pain. Frequencies have been identified for nearly every type of tissue in the body.
One of the ways FSM works is by potentially increasing the production of the substance ATP in injured tissues. ATP is the major source of energy for all cellular reactions in the body. Because treatment with FSM can increase ATP production by as much as 500% in damaged tissues, this may help with the recovery process. Depending on the condition, treatment with FSM can “loosen” or soften the muscles, which can help relieve pain and/or stiffness.
What conditions can be treated with frequency-specific microcurrent?
FSM is most often used to treat pain, especially nerve and muscle pain, inflammation, and scar tissue, from the following conditions:
- Kidney stones
- Irritable bowel syndrome
- Disc injuries
- Diabetic neuropathy
- Neuromas (overgrowth and scarring to a nerve after an injury)
- Tendinopathy (inflammation and/or swelling of the tendon)
- Acute (sudden) and chronic (long-term) musculoskeletal injuries
- Acute and chronic neuropathic (nerve) pain
- Chronic fracture and bone pain
- Torticollis (the head is tilted to one side)
- Disc injuries/discogenic- and facet-based pain
- Viscerally-referred pain
- Plantar fasciitis (pain in the heel and foot)
- Sports injuries
Is frequency-specific microcurrent painful?
Treatment with FSM is non-invasive and painless. The currents used in FSM are so low that the patient often does not feel them. During FSM treatment, patients may notice certain effects, including warmth and a softening of affected tissues.